Note for floor spring’s installation:
Camshaft end of floor spring, gate cramps and body of gate should be adjusted to one line on vertical direction , otherwise, friction resulting from opening/closing door will reduce the service life
Grinding or any kinds of tooling to the camshaft end of floor springs by using any tools is not allowed, otherwise, the gate will wobble and noise comes
When adjust the door closing speed, door should be opened to 90°and return by itself, external force is not allowed, until it is adjusted to suitable speed. Normally, 4-6 seconds for a whole closing is applicable.
Door closing regulating screw can only be adjusted slightly, never unscrewed, otherwise, oil leak comes and floor spring damaged.
Make sure all the screws are screwed-up after installation.
The way of the floor spring installs
Glass door installment
Floor springs used with patch
Applicable to glasses of 10-15mm thickness, the glasses must be toughened
Glass door installment(solution 1)
Glass door installment (solution 2)
Wooden and metal door installment solution
Thickness up to 40mm
Line shaft fitting
Earth axis fitting